Copyright © 2010 - Perfect Spatula Productions and Future Slope Designs

The Orbus is the latest addition to the FSD line of slope planes.  It is a plank-style sloper designed to perform in a wide variety of lift conditions.   As an in-your-face, close in flyer, the Orbus demonstrates outstanding aerobatic ability.  The Orbus will fly in 5 mph and ballasted up, can fly in 30 mph.   Inverted flight is effortless and outside loops are popular on the flight menu.  The Orbus can perform multiple methodic rolls in combination with other maneuvers while maintaining good energy retention.  This little speedster is a blast to fly...

Designed for Intermediate and Expert Pilots

Made on a Mac

ORBUS SPECS

WINGSPAN                 36”

WING AREA                270 sq. in.

WING LOADING         6.40 oz/sq. ft.

AUW                           9 -13 oz.

SUGGESTED GEAR

RADIO W/ELEVON MIXING

TWO HS 55 SERVOS or HS 81’s

BERG MICROSTAMP RECEIVER

4 CELL 1/3 AAA Rx BATTERY

ViewCart

Orbus 36

All kits are shipped via UPS Ground, which takes two to four days for delivery.

$55.00

 

plus shipping

PPOrbus

Allow 5-7 days for delivery.

1     2     3     4     5     6     7     8     9     10

Lift Ability

Roll Rate

Inverted

Inside Loops

Outside Loops

Penetration

Durability

VimeoOrbus

Each kit comes with the following:


  1. •     1.9 EPP pre-shaped fuse with precut canopy and receiver/battery bay and CF spars installed.

  2. •    1.9 EPP Wing Panels with wood drag spar and CF wing spars pre-installed and servo bays cut.

  3. •    Precut and sanded vertical stabilizer,

  4. •    Precut and sanded elevons

  5. •    Complete hardware package which includes: 

                               

2 CF Wing Joiners, 2 Plastic Molded Servo Covers, Rare Earth Canopy Magnets, Push Rods, Clevises, Couplers and Control Horns.

                       

Additional Items:

Instructional DVD, Schematic Sheet, Decals and Welcome Letter