Copyright © 2010 - Perfect Spatula Productions and Future Slope Designs

The Segway is the result of considerable research and development with the goal of developing a light-weight yet highly aerobatic slope machine.  Our design philosophy was aimed at going back to basics, to a simple design that incorporated the best of the past while integrating cutting edge aerodynamics.  The Segway uses the PW98 (modified) airfoil, which gives optimum lift with reduced drag.  This makes the Segway a very fast ship with excellent penetration and speed retention.  It also means that the Segway can fly in heavier lift without an ounce of extra ballast.  Most noteworthy is the Segway’s blistering roll rate, which is said to be among the fasted in its class.  Pilots will be pleased with the Segway’s other aerobatic abilities.  It performs both inside and outside loops with ease with inverted flight being effortless and predictable.  Flying in close or reaching for altitude in slermal conditions, the Segway offers a unique and challenging experience for all skill levels.

Designed for Intermediate and Expert Pilots

Made on a Mac

ORBUS SPECS

WINGSPAN                 35”

WING AREA                301 sq. in.

WING LOADING         5.72 oz/sq. ft.

AUW                           9 -15 oz.

SUGGESTED GEAR

RADIO W/ELEVON MIXING

TWO HS 55 SERVOS or HS 81’s

BERG MICROSTAMP RECEIVER

4 CELL 1/3 AAA Rx BATTERY

All kits are shipped via UPS Ground, which takes two to four days for delivery.

$60.00

 

plus shipping

Allow 7-10 days for delivery.

1     2     3     4     5     6     7     8     9     10

Lift Ability

Roll Rate

Inverted

Inside Loops

Outside Loops

Penetration

Durability

Please note that until the Segway Instructional DVD is completed, the Kaze DVD will be shipped in its place.

Segway

Each kit comes with the following:


  1. •     1.9 EPP pre-shaped fuse with precut canopy and receiver/battery bay and CF spars installed.

  2. •    1.9 EPP Wing Panels with wood drag spar and CF wing spars pre-installed and servo bays cut.

  3. •    Precut and sanded vertical stabilizer,

  4. •    Precut and sanded elevons

  5. •    Complete hardware package which includes: 

                               

2 CF Wing Joiners, 2 Plastic Molded Servo Covers, Rare Earth Canopy Magnets, Push Rods, Clevises, Couplers and Control Horns.

                       

Additional Items:

Instructional DVD, Schematic Sheet, Decals and Welcome Letter